Hitachi TM3030 Plus Instruction Manual page 217

1. Location of Save
Upon termination of the image capture using [Save] or [Quick Save], a list of available
drives and folders is displayed. Select the drive and the folder in which the image is to be
saved. Details (a list of files and folders) of the saving destination are displayed.
When creating a new folder, click [New Folder].
NOTE : The Save image window shows a previously used save location. If it does not
exist, specify [My Picture].
2. File Name
In the [File Name] box, enter the file name of the image to be saved.
NOTE : Any of the following characters cannot be used as a file name: [ / : ; * ? " < > | ! '
&] (half-width characters).
NOTE : If [Use Image Number ] is selected in the [File Name] block of [Setting for Save]
window (see 4.3.25.2b), an image number is displayed as a file name. If [Use
Magnification] is selected, a magnification is added to the file name.
3. File Type
Three types of an image file are supported:
File Type
JPEG file (*.jpg)
Bitmap file (*.bmp)
TIFF file (*.tif)
* The compression ratio for JPEG files cannot be changed.
4. Save Button
Saves the image file.
5. Cancel Button
Cancels the saving of the image file.
NOTE : When an image file is saved, an auxiliary condition file containing various settings in
the system is created with the same name as the image file, with an extension of *.txt.
NOTE : Do not turn off the main unit or unplug the USB cable when the save processing is
in progress. Doing so can result in a failed image save operation or a
time-consuming save operation.
Table 4.3.29 File Types
JPEG compatible image file (with image compression)
Bitmap image file (without image compression)
Tagged image file format (without image compression)
4 - 98
Format