Shutting Down The System - Hitachi TM3030 Plus Instruction Manual

4.2.15 Shutting Down the System

1. When not continuing observation, press the EVAC/AIR switch to introduce air into the
specimen chamber, and then remove the specimen.
2. Press the EVAC/AIR switch to evacuate the specimen chamber (observation-enabled).
After completion, the lighting pattern of EVAC LED (blue) changes from blinking to
lighting.
Figure 4.2.15-1 Pressing the EVAC/AIR Switch (Evacuation Operation)
3. Close the application, and shut down the PC.
Figure 4.2.15-2 PC Shut Down
4 - 43