Initial Startup Window (During Initialization) - Hitachi TM3030 Plus Instruction Manual

5.5.2 Initial Startup Window (During Initialization)

The error messages listed below are displayed mainly during the startup process of the
application program (when the initial window is being displayed).
<<Error Message List>>
Code Error Message
1101 The data in Adjust File are
wrong.
Cannot start up the
application.
1111 No data found in Initial File.
Do you default to start up PC?
1112 The data in Initial File are
wrong.
Do you default to start up PC?
1113 Cannot start up the
application. Failed to access
Initial File.
1115 Set up the observation screen
size when the application has
started.
Countermeasure
Click the [OK] button to close the program.
Adjustment file "TM_Adjust.ini" contains no data,
or some of the data are missing. Install the
system files (see 2.2.3) and copy the adjustment
file.
Initial file "TM_Scope.ini" contains no data or
some of the data are missing. To start this
application in default setting, click the [OK]
button; to terminate this application, click the
[Cancel] button.
After the application startup, set observation
screen size, referring to 2.2.8 in the instruction
manual.
Initial file "TM_Scope.ini" contains abnormal
data or some of the data are missing. To start
this application in default setting, click the [OK]
button, and the [Cancel] button to terminate this
application.
After the application startup, set observation
window size, referring to 2.5.7 in instruction
manual.
If this application could not be started in default
setting, this message is displayed. When the
user account is Limited user, switch to the other
account as Computer Administrator again. Set
the observation window size referring to 2.5.7 in
the instruction manual. Then it becomes
possible to start this application as Limited user.
Click the [OK] button to close the program.
Set the observation window size. For details,
refer to 2.5.7 in the instruction manual.
5 - 31