Output Log Data; About Tm3030Plus Application; Exit - Hitachi TM3030 Plus Instruction Manual

2. Upgrade of application program
Upgrading and repairing of the application program are possible.
When already installed, upgrade the application of the earlier version by using the
TM3030Plus Setup Tools.
When the version is the same, repair the application.
* For the upgrade procedure, refer to 2.5.1 Upgrading of the Application Program.
3. Upgrade of the instruction manuals
Upgrading and repairing of the instruction manual are possible.
When already installed, upgrade the Instruction manual of the earlier version by using
the TM3030Plus Setup Tools.
When the version is the same, repair the manual by using the TM3030Plus Setup Tools.
* for the upgrade procedures, refer to 2.5.2 Upgrading of the Instruction Manual.
4. Recover the system files
Restore the back-up system file from [TM3030Plus_Backup] folder on desktop.
* Without installation of the system file, TM3030Plus application program does not start.
* Do not use the back-up system file for other systems. Otherwise, the system does not
work properly and some troubles may occur.

2.6.3 Output Log Data

Select [Output log data] from the main menu, and the log data is output on screen.
Use the system log data to diagnose condition of the system when malfunction occurs.
The folder name containing the system log will be [Log data YYYYMMDDHHMMSS] (the
present time)

2.6.4 About TM3030Plus Application

Select [About TM3030Plus application] from the main menu, and the version note of the
TM3030Plus application program can be confirmed.

2.6.5 Exit

Select [Exit] from the main menu to exit the program of the TM3030Plus Setup Tools.
2 - 69