Hitachi TM3030 Plus Instruction Manual page 310

 Export
Converts and saves 3D-VIEW data in order to open it by other applications. The Export has
the following three submenus.
(1) Image
The data displayed in the image view is saved with the image file as bitmaps or the
text file as CSV format. When selecting Bitmap Files (*.bmp) from [Save as type] of
the Save as dialog, the image file as bitmap is saved. When selecting Text Files (*.csv)
from [Save as type], the text file as CSV format is saved.
(2) Profile
The data displayed in the profile view is saved with the image file as bitmaps or the
text file as CSV format. When selecting Bitmap Files (*.bmp) from [Save as type] of
the Save as dialog, the image file as BMP format is saved. When selecting Text Files
(*.csv) from [Save as type], the text file as CSV format is saved.
(3) TDV File Format
This function has been prepared to be used in the application developed by Japanese
company. However, this application can be sold only in Japan and therefore, this
function has no meaning except Japan.
See 7.19 Saving.
 Print
Prints the selected image. [Image], [Profile], [Image and Profile], and [4 images] are
available.
See 7.20 Print.
 Print Preview
This function displays the Print image dialog so that the results of printing can be checked
on the screen. For print settings, refer to the Print function.
 Print Setup
Displays the Printer settings dialog for printer settings.
Figure 7.9-2 Print image Dialog
7 - 16