Element A
4. Launch 3D-Image Viewer, and import the image captured as above.
5. On the 3D-Image Viewer application, select the [Condition] from the [Calibration] menu,
or click the [Condition] block of the main operation screen of 3D-Image Viewer view to
display the Condition table dialog. On the dialog, either select the measurement
parameters to be applied or create new ones.
6. Execute calibration of Flat according to the procedure of 7.24.3 Calibration of Flat.
Element B
Figure 7.25.1-5 Example of Flat Part Capturing
Figure 7.25.1-6 Condition Block
Figure 7.25.1-7 Condition table Dialog
Element C
7 - 82
Element D