Hitachi TM3030 Plus Instruction Manual page 18

Tabletop microscope
Table of Contents

Advertisement

Warnings Provided in the Instruction Manual
Injury by heavy load
 The system is a heavy object weighing approximately 65 kg (For Manual Stage) / 68 kg
(For Motor drive Stage). Install the system on a table with a minimum load bearing
capacity of 100 kg. Installing it on a table with an inadequate load bearing capacity can
cause the table to break, which can result in unexpected injury beyond damage to the
system.
To avoid injury from the falling or toppling of the system, do not install the equipment in
an unstable place or a place liable to fall or toppling due to an earthquake or other
events.
Do not install the device when delivering and do not transfer the device after installation.
Our engineer must carry out it.
 As a rule, do not move the diaphragm pump because it is a heavy load of 4.5 kg. When
moving it by necessity, move it carefully after considering the length of piping and cable,
the safety to one's foot, and impact to the pump.
Injury by volatile solvent
 When using a volatile solvent during the cleaning of parts for the system, verify
information (MSDS and the like) on the nature and handling of the solvent, and be sure
to handle it properly.
(1)
Do not put such chemicals near an open fire.
(2)
Ventilate a room.
(3)
Wear the directed protection tool.
For the Safe Handling of the System
(continued)
WARNING
(Chapter 1. Specifications and Installation Conditions)
(Chapter 1. Specifications and Installation Conditions)
SAFETY - 5
(Chapter 5. Maintenance)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents