Siemens SINUMERIK 840D sl Configuration Manual page 143

3. Select the checkboxes of the files that you want to install.
4. Confirm your entry with "Install".
Result
The general station description files are installed, and then the SINUMERIK I/O in the
hardware catalog displayed in the appropriate folders:
● SINUMERIK I/O for PROFINET IO: "Further field devices > PROFINET IO > I/O >
SIEMENS AG > SINUMERIK"
● SINUMERIK I/O for PROFIBUS DP: "Further field devices > PROFIBUS DP > NC/RC >
SIEMENS AG > MOTION CONTROL"
Figure 6-1
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017, A5E41846325
6.2 Installing general station description files for SINUMERIK I/O
Installed SINUMERIK I/O in the hardware catalog
Configuring I/O
143