Siemens SINUMERIK 840D sl Configuration Manual page 165

2. Click the "Change Safety Integrated mode" button.
The "Change Safety Integrated mode" dialog opens. If you select an option, the effects of
the mode change are performed here.
Figure 9-4
3. Select the required Safety Integrated mode and confirm the reconfiguration with "Yes".
Result
The Safety Integrated mode has been changed. The precise effects depend on the selected
mode and can be seen in the "Change Safety Integrated mode" dialog (step 2).
If you are using the Safety Integrated (SPL) mode, configure next the PROFIsafe addresses
(peripherals (Page 184) or drives (Page 188)).
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017, A5E41846325
"Change Safety Integrated mode" dialog when using NCU V4.7
Safety configuration
9.3 Changing the Safety Integrated mode
165