Siemens SINUMERIK 840D sl Configuration Manual page 34

Configuring the NCU
2.6 Creating SINUMERIK PLC archives
Note
Editing SINUMERIK archives (.arc)
After you have created a SINUMERIK archive, you can open and edit it with various tools.
See: External tools for SINUMERIK archives (Page 37)
Note
Handling of F-blocks for SINUMERIK archives
Because F-blocks must always be saved together with the associated hardware
configuration, F-blocks cannot be saved in reload archives.
Further information
● General information on series commissioning archives can be found in Section "Saving
and managing data" of the "SINUMERIK 840D sl, SINAMICS S120 Commissioning
CNC:NCK, PLC, Drive for TIA" Commissioning Manual.
● Information about the differences of the archives that were created with STEP 7 V5.x is
available at "Handling SINUMERIK archives".
34
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017, A5E41846325