Siemens SINUMERIK 840D sl Configuration Manual page 163

Figure 9-1 Marking of safety-related resources in the TIA Portal
No. Description
1 The project tree shows which components of your project are F-components.
2 In the network view, device view or topology view, the Safety Integrated marking is on the NCU, representative for the integrated
components. External devices, e.g. NX, may have their own Safety Integrated marking.
3 Safety-related settings are marked in the "Properties" inspector window.
4 Folders and the devices themselves are marked in the hardware catalog. You can therefore see whether SINUMERIK Safety Inte-
grated is supported before inserting the device.
5 Fail-safe devices are also marked in the information area of the hardware catalog.
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017, A5E41846325
9.2 Representation of safety-related resources in the TIA Portal
Safety configuration
163