Siemens SINUMERIK 840D sl Configuration Manual page 81

Checking the transmission speed of the ADI4
Although you can view the "Transmission speed" parameter in the DP interface properties,
you must select the bus system to change it:
1. Click the bus system.
2. In the "Properties" inspector window, check under "Network settings" the "Transmission
speed" entry. The ADI4 module can be operated only with the transmission speed 12
Mbit/s.
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017, A5E41846325
Configuring networks
4.2 Configuring PROFIBUS DP
81