Siemens SINUMERIK 840D sl Configuration Manual page 57

DB number
15...16
17
18
19
20
21...30
31...61
62...70
71...73
74...77
78...80
81...999
1000...1002
1003...1008
1009
1010...1019
1020...1070
1071...1073
1074...1099
1100...16000
Not recommended for use, but possible with limitations. Data blocks of channels,
1
axes/spindles and tool management functions that have not been activated can be used by
the user, but this can result in conflicts when upgrading or migrating the PLC basic program.
Further information
Information about the PLC basic program of the SINUMERIK 840D sl is contained in the P3
section of the SINUMERIK 840D sl Basic Functions Manual: PLC basic program for
SINUMERIK 840D sl.
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017
3.1 General information about the PLC program
Availability
Occupied
Occupied
Occupied
Occupied
Occupied
Occupied
1
Occupied
1
Freely available (user program)
Occupied
1
Occupied
Reserved
Occupied
1
Occupied
Reserved
Occupied
Reserved or available
Reserved
Occupied
Reserved
Freely available (user program)
Programming the PLC
Occupied by
Siemens (PLC basic program)
Siemens
Siemens (PLC basic program:
Safety Integrated (SPL))
Siemens (PLC basic program)
Siemens (SINUMERIK CPU-DB)
Siemens (PLC basic program:
Channel DB)
Siemens (PLC basic program:
Axis DB)
-
Siemens (PLC basic program:
tool management)
Siemens (PLC basic program)
Siemens
Siemens (ShopMill, ManualTurn)
Siemens (PLC basic program)
Siemens
Siemens (Safety Integrated plus
(F-PLC))
SI_DiagDB [DB1009] (automati-
cally generated)
Exclusively available for F
blocks of Safety Integrated plus
(F-PLC)
Siemens
Siemens (PLC basic program)
Siemens
-
57