Siemens SINUMERIK 840D sl Configuration Manual page 168

Safety configuration
9.4 Parameterization of relevant properties
Setting
Default F-monitoring
time for F-peripherals of
this interface
F-monitoring time
I/O address
Size of the PLC process
image
Name of an I/O system
node
IP address of an I/O
system node
168
Can be found at
Interface > F-parameters
Module/submodule > F-
parameters
Module/submodule > I/O ad-
dresses
PLC > Cycle
Device / header module > Gene-
ral
Device / header module >
PROFINET interface > Ethernet
addresses
Further information
Information system, keyword "Mon-
•
itoring and response times"
Information system, keyword "Con-
•
figuring the F-peripherals"
Information system, keyword "Mon-
•
itoring and response times"
Information system, keyword "Ad-
•
dressing modules (S7-300, S7-
400)"
Information system, keyword "Set-
•
tings for the cycle behavior (S7-
300, S7-400)"
Information system, keyword "S7-
•
300 memory areas"
Information system, keyword "As-
•
sign device name and IP address"
Information system, keyword "As-
•
sign device name and IP address"
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017, A5E41846325