Rear Differential - TGB EST 1000 Service Manual

Drive Shaft Boot Installation
▪ For installation, reverse the removal
procedure.
▪ Install new circlip.
▪ Pack bearing area with grease.
NOTE: Do not use or add other grease.
▪ Install new drive shaft clamps.

REAR DIFFERENTIAL

Rear differential Removal
Caution
Be sure the differential set temperature below
35℃
▪ Drain the differential oil.
▪ Remove both drive shafts.
▪ Detach vent hose from rear differential.
▪ Remove the lock mode cables.
▪ Remove bolts and nuts securing the
differential.
▪ Lift up the differential and slide backward to
detach from the propeller shaft.
▪ Remove the rear differential by pulling it from
the RH side.
NOTICE: Be careful not to knock or to bend
vent hose fitting while removing front
differential.
PDF created with pdfFactory Pro trial version www.pdffactory.com
6. DRIVE SYSTEM
6-9