ENGINE OIL STRAINER
▪ The engine oil strainer is located between both
crankcase halves.
▪ Usually the strainer no needs to clean.
▪ During engine over hall, it will clean after
separate the crankcase half.
▪ Remove the retaining bolts and pull the oil
strainer out.
Cleaning and Inspection
▪ Clean engine oil strainer with a part cleaner
then use airgun to dry it.
WARNING
Always wear eye protector. Chemicals can
cause a rash break out and injure your eyes.
▪ Check engine oil strainer for cracks or other
damage. Replace if damaged.
Installation
For installation, reverse the removal procedure.
REED VALVE
The engine is equipped with reed valve, which
prevents accumulation of large oil quantities in
the crankcase. The reed valve is fitted into the
crankcase.
Valve Removal
Remove
- Reed valve three retaining bolts.
- Stopper plate.
- Reed valve.
Valve Inspection
Check reed valve for cracks or other damage.
NOTE: Replace reed valve if damaged.
Valve installation
For installation, reverse the removal procedure.
PDF created with pdfFactory Pro trial version
3.LUBRICATION SYSTEM
www.pdffactory.com
②
③
①
3-9