Caliper - TGB EST 1000 Service Manual

CALIPER

Caliper Removal
1. Safety lift and support the vehicle.
2. Remove wheels.
3. If caliper is removed from vehicle for
replacement:
3.1 Drain brake system.
3.2Unscrew brake hose from caliper.
4. Remove fasteners retaining brake hose to
knuckle.
5. Remove screws securing caliper support
knuckle.
6. Place caliper assembly onto a support.
NOTICE: Do not let caliper hangs the hose and
do not stretch or twist hose.
Caliper Installation
For installation, reverse the removal procedure.
If caliper was removed for replacement:
- Refill and bleed brake system.
- Install new sealing washers.
Apply thread locker (LOCTITE 243)on caliper
retaining screws.
Tighten caliper retaining screws to specification.
TORQUE: 300-320 kgf-cm.
7-3. BRAKE SYSTEM AND BODY COVER
7-3-7