▪ Disconnect the wiring connector.
▪ Counter clockwise then remove the bulb.
Installation
▪ For installation, reverse the removal
procedure.
TAILLIGHTS/BRAKE LIGHTS
Brake Light Switch
▪ Disconnect the front brake switch connector.
▪ Press the right brake lever and check
continuity of brake switch connector.
▪ Replace if necessary.
Torque:
▪ Disconnect the rear brake switch connector.
▪ Press the left brake lever or pedal then check
continuity of brake switch connector.
▪ Replace if necessary.
Torque:
Taillight/Brake Light Replacement
▪ Disconnect the taillight wiring connector.
▪ Loosen and remove two nuts and washers.
▪ Pull taillight out through the rear bumper.
▪ For installation, reverse the removal
procedure.
8-1. ELECTRIC SYSTEM
8-1-19