8-1. ELECTRIC SYSTEM
TURN SIGNAL LAMP
Turn Signal
▪ Disconnect the wiring of turn signal connector.
▪ Press the left brake lever or pedal then check
continuity of brake switch connector.
▪ Replace if necessary.
Replacement
▪ Remove five screws of turn signal lamp.
▪ For installation, reverse the procedure of
removal.
HORN
▪ Disconnect the wiring of horn connector.
▪ Press the horn switch and check continuity.
▪ Replace if necessary.
Horn
Replacement
▪ Remove bolt of horn.
▪ For installation, reverse the procedure of
removal.
8-1-20