Battery Cleaning; Battery Storage; Battery Installation - TGB EST 1000 Service Manual

Battery Cleaning

Clean the battery rack, cables and battery posts
using a solution of baking soda and water.
Remove corrosion (if so) from battery cable
terminals and battery posts using a firm wire
brush. Rinse with clear water and dry well.

Battery Storage

If the battery is in storage or used infrequently,
disconnect the battery cables to eliminate drain
from electrical equipment.
For extended storage, remove the battery from
vehicle.
Clean battery terminals and cable connections
using a wire brush. Apply light coat of
ELECTRIC GREASE on terminals.
Clean battery casing using a solution of baking
soda and water. Rinse battery with clear water
and dry well using a clean cloth.
Regularly charge battery as per manufacturer's
recommendations.
WARNING
Ensure to store battery in a safe place, out
of reach for children.

Battery Installation

NOTICE: Always connect RED (+) cable first
then BLACK (-) cable.
For installation, reverse the removal procedure.
- Install the battery with the positive post down.
- Tighten battery strao retaining nut to the
specified torque.
TORQUE: 3.4 Nm+/- 0.3.
8-1. ELECTRIC SYSTEM
8-1-11