Steering Handle; Wheel/Tire; Nuts, Bolts Tightness - TGB EST 1000 Service Manual

2. MAINTENANCE INFORMATION

Steering Handle

Caution
Check all wires and cables if they are interfered
with the rotation of steering handle bar.
Lift the front wheel out of ground.
Turn handle from right to left alternative and
check if turning is smoothly.
If handle turning is uneven and bending, or the
handle can be operated in vertical direction, then
check the handle top bearing.

Wheel/Tire

Caution
Tire pressure check should be done as cold
engine.
Check if tire surface is ticked with nails, stones or
other materials.
Appointed tire pressure
Tire size
Tire pressure as cold
Check if front and rear tires' pressure is in
normal. Measure tire thread depth from tire
central surface. Replace the tire if the depth is not
come with following specification:

Nuts, Bolts Tightness

Perform periodical maintenance in accord with
the Periodical Maintenance Schedule
Check if all bolts and nuts on the frame are
tightened securely.
Check all fixing pins, snap rings, hose clamp,
and wire holders for security.
2-10
PDF created with pdfFactory Pro trial version
Front Tire Rear Tire
7 psi 7 psi
Front tire: 1.5 mm
Rear tire: 2.0 mm
www.pdffactory.com