Method Of Use - TGB EST 1000 Service Manual

Method of Use:

1. Connected to the diagnostic connector for diagnosis tool.
NACS→TGB interface→Transfer Cable→TGB 3 pin/6 pin Diagnosis Cable→Vehicle.
2. When the IG of the motorcycle is on, the system starts to run, entering into boot screen.
3. Key ON and the diagnosis display screen appeared the words connection.
4. Press the "ENTER" button and the system will identify the vehicle model automatically and
display the vehicle info on the screen, as following picture
5. Press "ENTER" button again for more detailed vehicle information. Press ▲▼ button to
view all information.
Diagnosis Use Note
Press "ENTER" button to the function menu.
Options main functional areas:
1. Vehicle Info
4-2. FUEL INJECTION SYSTEM
4-2-53