Browse Arp Table; Browse Vlan; Igmp Snooping; Browse Igmp Router Port - D-Link xStack DES-3200-10 User Manual

xStack
Bac Auth Fail

Browse ARP Table

This window displays current ARP entries on the Switch. To search a specific ARP entry, enter an Interface Name or
an IP Address at the top of the window and click Find. Click the Show Static button to display static ARP table entries.
To clear the ARP Table, click Clear All.
The view this window, click Monitoring > Browse ARP Table:

Browse VLAN

This window allows the VLAN status for each of the Switch's ports to be viewed by VLAN. Enter a VID (VLAN ID) in
the field at the top of the window and click the Find button.
To view this window, click Monitoring > Browse VLAN:

IGMP Snooping

The following windows are used to configure the IGMP Snooping settings of the Switch.

Browse IGMP Router Port

This window displays which of the Switch's ports are currently configured as router ports. A router port configured by a
user (using the console or Web-based management interfaces) is displayed as a static router port, designated by S. A
router port that is dynamically configured by the Switch is designated by D, while a Forbidden port is designated by F.
Enter a VID (VLAN ID) in the field at the top of the window and click the Find button to display the various types of
IGMP router ports that belong to the specified VLAN.
®
DES-3200-10/18/28/28F Layer 2 Ethernet Managed Switch User Manual
Counts the number of times that the state machine receives a Reject message from the
Authentication Server (i.e., aFail becomes TRUE, causing a transition from RESPONSE to
FAIL). Indicates that the Supplicant has not authenticated to the Authentication Server.
Figure 7 - 23. Browse ARP Table window
Figure 7 - 24. Browse VLAN window
206