Table of Contents
Advertisement
Web User Interface
The Captive Portal is a built-in web authentication server. When a station connects to an AP, the web browser will be redirected to a web authentication
page. In this window, user can view and configure the Captive Portal settings. After selecting Web Redirection Only as the Authentication Type, we
can configure the redirection website URL that will be applied to each wireless client in this network.
Session
Enter the session timeout value here. This value can be from 1 to 1440 minutes. By default, this value is 60 minutes.
timeout(1-1440) :
Select 2.4GHz or 5GHz.
Band :
Select the SSID for this Authentication.
SSID Index :
Select the captive portal encryption type here.
Options to choose from are Web Redirection,
Authentication Type :
Username/Password, Passcode, Remote
RADIUS, LDAP and POP3. In this section we'll
discuss the Web Redirection option.
Web Redirection State :
Default setting is Enable when select Web
Redirection Only.
URL Path :
Select whether to use either HTTP or HTTPS
here. After selecting either http:// or https://,
enter the URL of the website that will be used
in the space provided.
IPIF Status :
Select to Enable or Disable the Captive Portal
with its IP interface feature here.
VLAN Group :
Enter the VLAN Group ID here.
Get IP From :
Static IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or if you wish to
assign a static IP address to the DIS-2650AP. When Dynamic IP (DHCP) is selected, the other fields here will be grayed out.
Please allow about 2 minutes for the DHCP client to be functional once this selection is made.
Captive Portal
Authentication Settings-Web Redirection Only
52
Advertisement
Table of Contents
