Sflow; Sflow Global State Settings; Sflow Analyzer Server Settings - D-Link DGS-3700 Series User Manual

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

sFlow

The sFlow folder contains four windows to enable and configure the sFlow settings on the Switch.

sFlow Global State Settings

This table is used to enable or disable the sFlow Global State Settings on the Switch. The sFlow version, address and
state configurations can also be viewed in this table.
To view this window, click Configuration > sFlow > sFlow Global State Settings as shown below:
Select Disabled or Enabled and click Apply.

sFlow Analyzer Server Settings

This window is used to configure the sFlow analyzer server settings. You can specify more than one analyzer server
with the same IP address but with different UDP port numbers. You can have up to four unique combinations of IP
address and UDP port numbers.
To view this window, click Configuration > sFlow > sFlow Analyzer Server Settings as shown below:
The following parameters can be configured:
Parameter
Analyzer Server ID (1-4)
Owner Name
Figure 2 - 55 Time Range Settings window
Figure 2 - 56 sFlow Analyzer Server Settings window
Description
Up to four
sFlow Analyzer Servers can be configured.
The entity making use of this sflow analyzer server. When owner is set or modified, the
48