Number of users
100 to 499
500 to 999
1000 or more
Examples
# Set the real-time accounting interval to 51 minutes for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer realtime-accounting 51
Related commands
retry realtime-accounting
timer response-timeout (RADIUS scheme view)
Use timer response-timeout to set the RADIUS server response timeout timer.
Use undo timer response-timeout to restore the default.
Syntax
timer response-timeout seconds
undo timer response-timeout
Default
The RADIUS server response timeout period is 3 seconds.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
seconds: Specifies the RADIUS server response timeout period, in the range of 1 to 10 seconds.
Usage guidelines
If a NAS receives no response from the RADIUS server in a period of time after sending a RADIUS request,
it resends the request so that the user has more opportunity to obtain the RADIUS service. The NAS uses
the RADIUS server response timeout timer to control the transmission interval.
The maximum number of RADIUS packet transmission attempts multiplied by the RADIUS server response
timeout period cannot be greater than 300 seconds.
Examples
# Set the RADIUS server response timeout timer to 5 seconds for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer response-timeout 5
Real-time accounting interval
6 minutes
12 minutes
15 minutes or longer
53