Sealing Strips, Trim Mouldings And Glass - Volvo 164, 1970 Service Manual

GROUP 84
SEALING STRIPS,
TRIM MOULDINGS AN D GLASS
REPAI R I NSTRUCTIONS
SEALI NG SiRI PS
The sea ling strips are secured by means of spot-
welded fastenil'lg rails.
The sea ling strip is removed by pulling it outwards,
when the ridge of th e strip releases from the rai!.
When fitting the sea ling strip, one of the ridges is
placed in position in the rail, the other ridge is then
pressed down into the rail with the help of a wooden
putt Y knife. This is moved along the rail as shown in
Fig.8-18.
Fig.8-18. Fitting the sealing strip
8 : 12
TRIM MOULDINGS
Waist mouldings
The waist mouldings are attached with plastic clips.
The mouldings are removed with the help of a
wooden putt Y knife with which they are carefully
levered off. The clips ca n be removed by carefully
pul, l ing them off with pliers.
When fitting, begin by placing in the clips and lock-
ing them by pressing in the stud in the middle. The
moulding is then pressed onto the clips.
Removing the windshield moulding
The windshield moulding is fixed by means of clips
pressed into the slits in the windshield opening in the
body.
The moulding can, for example, be suitably removed
with a steel putt Y knife. Insert the knife between the
windshield and moulding opposite a clip, see Fig. 8-19.
Then prise the moulding loose.
Fig. 8-19. Removing the trim moulding
l