Replacing Bushes For The Support Stav - Volvo 164, 1970 Service Manual

Fig. 7-14. Fitting the large bush, track bar
REPLACING BUSHES FOR THE SUPPORT STAV
The bushes of the support stay are pressed out with
tool SYO 2734 a nd counterho ld SYO 2733. They are
suitab ly pressed in with a drift press directly on the
bush and with tool SYO 2733 as a co unterhold (see
Fig. 7-15). Before pressing in the rubber bush, coat
it with oil so that it slides easily in position and is
not damaged.
When fitting the bushes, they should be turned so
that the markings come at right angles to the length
of the stayas shown by the arrows in Fig. 7-l6.
Fig. 7-15. Fitting the bush , support stav.
Fig. 7-16. Marking up the support stav bush
VO LVO
lOJ 782
7:9