Removing Ventilation Windows; Removing Front Door Window Winder; Removing Rear Door Winder - Volvo 164, 1970 Service Manual

Removing rear door winding window
See t he corre.spond ing section above.
Removing ventilation windows
1.
Carry out operations
1- 5
under " Removing front
door frame.
2. Remove the grooved strip from the front slid e
rail of the winding window and unscrew the
screws which hold the plate under the ventilation
window. Then unscrew the screws on the opposite
side and remove the pl'ate.
3. Af ter the rubber strip round the ventilation window
ha s been removed from the groove all round,
the window with strip can be taken off, see
Fig . 8-14.
Removing front door window winder
1. Wind down t he window so that it come s near the
bottom position .
2. Re move th e door panel in accordance with the
instructions under "Removing inner handles and
upholstery" .
Fig. 8-14. Door frame
8: 10
3. Remove the attaching screws between t he front
g ui de ro il and brocket between t he door and
brocket. Re move t he braeket.
4. Re move th e locking springs and wa she rs for th e
lifting arm. Begin by removing the spring in the
door slide. The springs are removed by pressing
them right in and then releasing them, after which
they can be taken off.
N.B. Take care that the window does not fall
down into the door. Even if the window is p laced
care less ly at the bottom of the door, the sli de roil
can damage the outer plate.
5. Move up the winding window to the top position.
Lock the window by pfacing a screwdriver under
the slide roil in the upper rear cli p hole for the
door upholstery.
6. Remove the attaching screws for the window
winder, see Fig. 8-8, and remove it from the door,
see Fig. 8-15.
Removing rear door winder
Proceed in the same way as des::ribed above. How-
evert point 3 does not need to be carried out when
removing the rear door window winder.
Fig.8-15. Winding mechanism