Volvo 164, 1970 Service Manual page 271

SVD le01 SVD 2294
@
SVD 2725 SVD 2730
GROUP 70
GENERAL
TOOlS
SVD 2722
SVD 2715
SVD 2726 SVD 2723
SVD 2731
SVO 2732 SVD 2733
SV02734
Fig. 7-1. Tools used for work on the rear axle suspension and hub
SVO 1801 Standard handle 18 x 2CO mm .
SVO 2294 Puller for ball joint, steering rod.
SVO 2715 Drift for removing and fitting grease cap
.
SVO 2722 Puller for inner ring, inner wheel bearing.
SVO 2723 Drift for fitting outer ring, inner front wheel bearing
and seal.
SVO 2724 Drift for fitting outer ring, outer front wheel bearing,
and removing outer ring, inner wheel bearing.
SVO 2725 Drift for removing outer ring, outer front wheel
bearing.
SVO 2726 Puller for front wheel hub.
SVO 2730 Drift for removing and fitting
small bush, track bar
and rear bush in support arm (+ SVO 2733).
SVO 2731 Drift for removing and fitting large bush, track bar
(+ SVO 2733) ..
SVO 2732 Drift for removing and fitting front bush, support arm.
SVO 2733 Counterhold for removing and fitting bush, support
arm, support stay and track bar.
SVO 2734 Drift for removing bush in support stay.
SVO 2862 Press tool for replacing wheel bol
t.
SVO 2724
SVD 2862
VO LVO
104284
7 : 1