Table of Contents
Advertisement
GROUP 35
LIGHTING
DESCRI PTION
Fig.
3-60.
Head
li
ghts and fog
li
g hts
The lighting consists of two full- and dipped -beam
headlights, parking lights, rear lights and number
plate light. Vehicles intended for U.S.A. are also fitted
with side-marking lights and for all markets except
U.S.A. the v,ehicles are fitted with fog
Iights.
The headlights are fitted in the mudguards and the
fog lights are housed in the front end, see Fig
.
3-60.
Vehicles delivered to U.S.A. have small grill,e
cover-
ings over the recesses
ins,
t ead of fog
lights.
Extra
lights can be installed in f.hese 'recesses merely by
removing the
covers.
"V-OrlErV-O
1-6-<1
Fig. 3-61.
Rear
light
VOLVO
103324
Switching between
f
ull
-
and dipp ed-be
a
m position
s
is
done by moving th
e
di
re
ctional signal indicato
r
lever
switch towards th.e steering wheel. This causes the
stop relay (Fig. 3-79) to connect up the lighting.
Up front the pa'rking lights are integrally built wit,h
the flashe
rs
and are mounted on the front bumper
at the corners.
The rear lights are provided with separate bulbs for
rear lights, stop lights, back-up lights and directional
indicators, see Fig
.
3-61.
REPAIR INSTRUCTIONS
HEADLlGHTS
REPLACING HEADLlGHT INSERT
l.
Remove the screw and take off the plastic cover
over the space behind
I
t he headlight, see Fig. 3-63.
2. Remove
the
connecting
contact
by
pulling
it
straight
backwards.
3.
Remove the outer rim by pulling it
upwards-for-
wards, see Fig
.
3-64.
3: 26
4. Release the screws for th.e inner rim a couple of
turns, see Fig
.
3-65, turn the rim and lift it off
together with the headlight
insert.
5.
Remove the rubber cover from the old insert and
fit it on the new one.
6.
Fit the insert and inner rim
.
fit the outer rim by
hooking the lower section in the spring wire
holders, then lift the rim stmight up and hook
ii' on securely.
Advertisement
Table of Contents
