Bumpers - Volvo 164, 1970 Service Manual

BUMPERS
The bumpers are made of aluminium in one piece.
They are faced with a hard-rubber strip which is fitted
in the bumper roil by meons of screws. The bumpers
are mounted on four support bars, the front ones
of which are attached to the front side members
and the rear ones fitted directly in the body.
Removing and fiHing
The front bumber is removed by unscrewing the bolts
inside the bumper. The support bars are removed at
the front frame members.
The rear bumper is removed by unscrewing the bolts
between the support bars and body. The support
bars can then be removed from the bumper by un-
screwing the bolts inside the bumper.
Fitting is done in the reverse order.
8: 21