Table of Contents
Advertisement
Replacing the USB Drives
FIGURE 3-9
3.3
Servicing a Processor and Heat Sink
(FRU)
Use this procedure to replace a processor or a processor and heat sink. You need to
identify the failed processor, remove the heat sink and processor, and then install
replacement parts.
When replacing processors, do not install processors of different speeds on the same
motherboard.
Note – Position P0 and P1 must always contain a processor.
Note – The processor is a FRU and must be replaced only by qualified service
technicians. Contact your Sun Service representative for assistance.
Chapter 3
Servicing Server Module Components
3-17
Advertisement
Chapters
Table of Contents
