Installation; Led Indications; Connectors - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100
LED Indication
Live LED Busy LED
(Green) (Red)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash (100ms
On/Off)
System Hardware Manual
5.3.2

Installation

Install the CD-8COTAH blade into an available slot in the chassis.
5.3.3

LED Indications

LED indications for the CD-4COTA are listed in
8COTAH LED
function and LED and Operational status.
Table 4-45 CD-8COTAH LED Indications
Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
5.3.4

Connectors

5.3.1 Table 4-46 CD-8COTAH RJ-61 Cable Connector Pin-Outs on page
Indications. Each LED is listed with its associated
Issue 7.0
Table 4-45 CD-
Remarks
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
–
–
–
4 - 83