UNIVERGE SV8100
ML440/AP300 C
S
11
ECTION
The ML440/AP300 chapter outlines the steps for connecting and mounting the base
station, charging the battery and powering on the handset.
11.1
System Hardware Manual
ORDLESS HANDSET
Connecting the Base Station
If your network connection does not provide Power Over Ethernet, you will need to
.
order a base station AC adapter and a standard Ethernet-to-PoE adapter. Contact
Customer Service.
Figure 5-147 Views of AP300 Base Station mounted horizontally.
11.1.1
Install the Base Station
1.
Connect a standard Ethernet cable (Cat 5 or higher) to the
Ethernet/PoE jack on the rear of the base station.
Issue 7.0
5 - 119