Stand Mounting The 19" Chassis; Chs2U Chassis Installation - NEC UNIVERGE SV8100 System Hardware Manual
Hide thumbs
Also See for UNIVERGE SV8100:
- Features and specifications manual (2210 pages) ,
- Features & specifications manual (1174 pages) ,
- Programming manual (986 pages)
Table of Contents
Advertisement
Issue 7.0
2.3
3 - 16
3.
Connect the ground wire to all chassis. Refer to
19" Chassis Grounding on page 3-52
grounding the system.
4.
Refer to
installation of the chassis or, Chapter 5 paragraph
Installing an Extension or Trunk Blade on page 4-4
installation of blades.
Stand Mounting the 19" Chassis
A single or multiple chassis can be stand mounted. Controlling and Expansion
chassis can be stand mounted using the CHS2U STAND KIT(K) and CHS2U
STAND KIT (EXT).
2.3.1
CHS2U Chassis Installation
1.
Using the supplied screws, assemble the CHS2U STAND
KIT(K) and CHS2U STAND KIT (EXT) (refer to
Assemble Stand Mount with
Figure 3-18 Assemble Stand Mount with Screws
2.
Secure the CHS2U chassis to the assembled CHS2U STAND
KIT, see
STAND KIT with Screws on page
2.7 Installing the 19" Chassis on page 3-39
Screws).
Figure 3-19 Secure CHS2U Chassis to CHS2U
UNIVERGE SV8100
2.7.5 Install
for complete details on
to continue
2.2
for
Figure 3-18
Expansion
Plate
3-17.
Installing the SV8100 Chassis
Advertisement
Table of Contents
