NEC UNIVERGE SV8100 System Hardware Manual page 443

UNIVERGE SV8100
System Hardware Manual
10. Gently press the serial cable into the grooved cutout for the
cable.
Figure 6-40 Grooved Cutout for Serial Cable
11. Connect the serial connection cord (refer to
PSA-L Unit to the Multiline Terminal on page
PSA-L UNIT to the terminal body.
12. Open the Dip Switch Cover (refer to
Connections on page
adapter to the required position. Close the cover.
13. If using the handset, place the stopper in the tilt leg.
Figure 6-41 Insert Stopper for Handset Use
Cable Groove
Figure 6-35 PSA-L UNIT
6-44). Set the dip switch on the PSA-L
Issue 7.0
Figure 6-39 Attach
6-46) from the
6 - 47