Bluetooth Hub Adapter; Installing The Bha-L Unit - NEC UNIVERGE SV8100 System Hardware Manual

Issue 7.0
B
S 8
LUETOOTH
ECTION
8.1
5 - 92
H A
UB DAPTER
Bluetooth Hub Adapter (BHA) Features
The BHA-L UNIT adapter connects a Bluetooth device to a multiline terminal.
The BHA-L UNIT cannot be connected to the DTL-2E-1 or DTL-6DE-1
telephone.
8.1.1

Installing the BHA-L UNIT

Before installing or removing the BHA-L UNIT,
remove the line cord and the AC adapter from the
outlet.
1. Turn multiline terminal upside down.
2. Unplug the line cord and handset cord from the multiline
terminal.
Only one BHA-L UNIT can be attached to the DTL multiline terminal.
.
3. Lower the tilt leg to the first position (refer to
Separate Tilt Leg from Leg
Tilt Leg
4. Remove the connector cover (rubber) from the bottom of the
multiline terminal (see
Cover on page
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Support).
Figure 5-113 Separate Tilt Leg from Leg Support
Figure 5-114 Removing the Connector
5-93).
UNIVERGE SV8100
Figure 5-113
Stoppers