NEC UNIVERGE SV8100 System Hardware Manual page 308

Issue 7.0
5 - 36
5. Press Soft Key 2 for Key Kit Type.
6. Select the type of keypad kit being used by pressing the Up/
Down key.
Table 5-7 Keypad Kit Type
Keypad Kit Entry
Kit1
Kit2
Kit3
Kit4
Kit8
Kit9
Kit10
Kit11
Kit12
7. Press Soft Key 4 for Next.
8. Select the type of line key kit being used by pressing the Up/
Down key.
By default, the correct line key kit for the keypad kit selected above
.
will be highlighted.
Table 5-8 Line Key Kit Type
Line Key Kit Entry
Kit12
Kit24
Kit32
Kit8
Kit6
Kit2
Kit0
9. Press Soft Key 4 for OK to complete.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Description
Type A – Japan with cursor key
Type A – US with cursor key
Type B – US with cursor key
32 Line Key without cursor key
Type A – Japan without cursor key
Type A – US without cursor key
Type B – US without cursor key
Description
Enhanced 12-Button
Enhanced 24-Button
Enhanced 32-Button
DESI-Less
Value 6-Button
Value 2-Button
IP-CTS
UNIVERGE SV8100