NEC UNIVERGE SV8100 System Hardware Manual page 97

UNIVERGE SV8100
System Hardware Manual
Brackets Secured in Mounting Position with
Figure 3-30 Brackets Secured in Mounting Position with Screws
6. Rotate the brackets into the mounting position. Using the same
screws, secure the metal brackets to the bracket assembly
(refer to Figure 3-30 Brackets Secured in Mounting Position
with Screws).
7. Remove the end brackets from the remaining two corners and
set aside (refer to
3-28).
Figure 3-31 Remove End Brackets on page
Issue 7.0
Screws).
3 - 27