Removing The Multiline Terminal From The Wall Mounted Plate - NEC UNIVERGE SV8100 System Hardware Manual

Hide thumbs Also See for UNIVERGE SV8100:

Table of Contents

Removing the Multiline Terminal from the Wall Mounted Plate.

To remove the Multiline Terminal, push up on the telephone until it

comes loose.

Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals

Align the two holes on the back of the WM-L UNIT

with the two screws on the wall plate and slide

downward (refer to

Terminal Wall on Wall

Figure 5-87 Mount Multiline Terminal Wall on Wall Plate

Because of strength variation in switch boxes, this

method is not recommended.

Push excess line cord behind the Multiline Terminal.

Figure 5-88 Removing the Multiline Terminal

UNIVERGE SV8100

Figure 5-87 Mount Multiline