NEC UNIVERGE SV8100 System Hardware Manual page 356

Issue 7.0
5 - 84
10. Insert the cradle connecting cable of the Bluetooth Cradle
(BTC) into the unit connector.
Figure 5-99 Attach Bluetooth Cradle to the Multiline Terminal
11. Fit the projections on the side of the Bluetooth Cradle into the
guide holes on the side of the terminal and pull toward you
(Figure 5-99 Attach Bluetooth Cradle to the Multiline
until the unit snaps into place.
12. Attach the side panel to the Bluetooth Cradle.
13. Press the connecting cable into the grooved cutout.
Figure 5-100 Grooved Cutout for Connecting Cable
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
UNIVERGE SV8100
Terminal)