NEC UNIVERGE SV8100 System Hardware Manual page 143

UNIVERGE SV8100
System Hardware Manual
5. The metal bracket is placed on top of the batteries and able to
hold them in place. Insert the metal tabs of the bracket into the
slots on the side of the battery compartment and lower into
place. Using the two screws provided, attach the bracket to the
battery compartment.
Figure 3-95 Installing the Bracket Using Screws
6. Insert the battery cable through the slot on the battery
compartment and connect the battery cable to the connection
points on the battery compartment (refer to
Installing the Batteries on page
Figure 3-96 Installing the Battery Connection Cables
Figure 3-94
3-72).
Issue 7.0
3 - 73