UNIVERGE SV8100
10.13 Installing the Handset Battery Pack
System Hardware Manual
2.
To remove the clip, press the retaining clip in toward the belt clip blade
and slide the clip up at the same time.
Before installing batteries, refer to D
Specifications and Battery Safety. It is important to follow safety regulations
when handling batteries.
1.
Remove the battery cover by pressing the latch and sliding the cover
down and off of the handset.
Figure 5-143 Removing the Belt Clip
term ®
Cordless DECT Owner's Manual
Figure 5-144 Removing the Battery Cover
Issue 7.0
5 - 117