Wall Mounting The 9.5" Chassis - NEC UNIVERGE SV8100 System Hardware Manual

Issue 7.0
2.5
3 - 24
6. Connect the ground wire to all chassis. Refer to
Grounding on page 3-52
7. Refer to 2.7 Installing the 19" Chassis on page 3-39
installation of the chassis or, Chapter 5 paragraph
Extension or Trunk Blade on page 4-4

Wall Mounting the 9.5" Chassis

When wall mounting the chassis, ensure the wall can support the weight of the
chassis and (25 lbs per system chassis ---- including blades, cords, power
supply, etc.). The chassis is secured to the wall with a wall mount bracket.
Optional wall mounting brackets exist for the 9.5" chassis (refer to
Optional Wall Mounting Brackets for 9.5"
mounting bracket is secured to the wall and the chassis attached to the
bracket. Option 2 attaches the bracket to the 9.5" chassis and then, using the
key-holes as a guide, the assembled unit slides over screws secured to the
wall using the template shown in
Chassis) on page 3-25.
Figure 3-27 Optional Wall Mounting Brackets for 9.5" Chassis
for complete details on grounding the system.
for installation of blades.
Chassis). Option 1 attaches the
Figure 3-28 Wall Mount Spacing Guide (9.5"
Installing the SV8100 Chassis
UNIVERGE SV8100
2.7.5 Install 19" Chassis
to continue
2.2 Installing an
Figure 3-27