UNIVERGE SV8100
System Hardware Manual
2.7.3
Installing the 19" Controlling Chassis
1.
Ensure the chassis is powered down.
2.
Align the CD-CP00 blade with the Slot 1 guides of the
Controlling Chassis.
Figure 3-45 19" Controlling Chassis – Guides Slot 1
3.
Slide the CD-CP00 blade into the chassis until resistance (back
plane) is felt.
Figure 3-46 Installing the CD-CP00
Do not remove or install this blade with the
power on.
Issue 7.0
Blade
3 - 41