Installation; Led Indications - NEC UNIVERGE SV8100 System Hardware Manual

Issue 7.0
LED Indication
Live LED Busy LED
(Green) (Red)
On On
Flash (1s) On
Flash (1s)
4 - 46
Table 4-19 CD-8DLCA/CD-16DLCA Maximum Upgrade Capacities
provides the maximum capacities for the ESIU blades when they are
upgraded.
Table 4-19 CD-8DLCA/CD-16DLCA Maximum Upgrade Capacities
19"
ESIU Chassis
with CPU
CD-8DLCA
CD-16DLCA
4.1.2

Installation

The CD-8DLCA/CD-16DLCA blades can be installed in any universal
slot in the system and up to a maximum of 20 DLCA blades can be
installed per system, providing up to 368 digital ports.
To install the PZ-8DLCB
1. If installing the CD-8DLCA and the PZ-8DLCB daughter board
is to be attached, do so now. Refer to
4-50.
2. Each CNx01 connector (CN101, CN201, CN301, CN401) is
used to connect up to four digital extensions.
4.1.3

LED Indications

LEDs for the CD-8DLCA
CD-8DLCA/CD-16DLCA LED
associated function and LED and Operational status. Refer to
4-16 CD-8DLCA Blade
location of the LEDs on the blades.
Table 4-20 CD-8DLCA/CD-16DLCA LED Indications
Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
19" Chassis
without CPU
5 6
5 5
CD-16DLCA:
/
CD-16DLCA are described in
/
Indications. Each LED is listed with its
and Figure 4-17 CD-16DLCA Blade
UNIVERGE SV8100
19" Chassis Networked
x4 Chassis
23
20
4.2.2 Installation on page
Table 4-20
Remarks
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
Installing the SV8100 Blades
32
32
Figure
for the