Connectors - NEC UNIVERGE SV8100 System Hardware Manual

Hide thumbs Also See for UNIVERGE SV8100:

Table of Contents

UNIVERGE SV8100

System Hardware Manual

Connectors

The CN2 connector provides connection to four analog DID trunk

ports, which are polarity sensitive (tip-to-tip, ring-to-ring). The

OPX circuits, however, are not polarity sensitive. The DIOPU

requires one universal slot. (Refer to

4-95.) If Program 10-03-01 has OPX defined, note that the

blade consumes four (4DIOPU) trunks or eight (8DIOPU) trunks and

extension ports when installed. If OPX is not defined, then only

trunks ports are consumed.

Table 4-54 CD-4DIOPB RJ-61 Cable Connector Pin-Outs on page

shows the pin-outs for the RJ-61 connector. Refer to

4-28 CD-4DIOPB Blade on page 4-95

location of the connectors on the 4DOIPU blade.

Table 4-54 CD-4DIOPB RJ-61 Cable Connector Pin-Outs

Figure 4-28 CD-4DIOPB Blade

for an illustration showing the

RJ-61 Cable Connector – CN2