NEC UNIVERGE SV8100 System Hardware Manual page 102

Issue 7.0
3 - 32
4. Align the bracket halves with the precut holes in the metal
expansion fitting provided (refer to
Brackets and Metal Expansion
Figure 3-35 9.5" Mounting Brackets and Metal Expansion Fitting
5. Secure the bracket halves to the expansion fitting using the
four supplied screws (refer to
Brackets and Metal Expansion Fitting on page
6. Turn bracket assembly over and remove the screws holding
UNIVERGE SV8100
Figure 3-35 9.5" Mounting
Fitting).
Figure 3-35 9.5" Mounting
3-32).
Installing the SV8100 Chassis