Remove And Install Cooling Fan; Chs2U Chassis; Remove Cooling Fan; Install Cooling Fan - NEC UNIVERGE SV8100 System Hardware Manual

Hide thumbs Also See for UNIVERGE SV8100:

Table of Contents

UNIVERGE SV8100

If required, the cooling fan installed in the CHS2U chassis can be removed and

replaced. The following provides the procedure for the CHS2U chassis.

System Hardware Manual

To reduce the possibility of electrical shock or

damage to equipment, NEC recommends

powering Off the chassis and disconnecting the

AC cable from the power source before

removing the chassis cover.

Ensure the chassis is powered down.

Loosen retaining screw from chassis access panel.

To reduce the possibility of damage to

equipment, the installer must wear a

grounded wrist strap to protect the

equipment from static electricity.

Figure 3-101 19" Chassis Access Panel

Retaining Screw